LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Expedition 5.4 L, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1 (A/C-Heater System - Manual) >> Removal & Installation >> Condenser >> Removal & Installation

Removal & Installation

WARNING: This page is about a different car, the 1999 Ford Expedition. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect negative battery cable. Discharge A/C system, using approved refrigerant recovery/recycling equipment. Remove radiator. Disconnect condenser inlet and outlet lines. Plug all openings. Remove condenser.
  2. To install, reverse removal procedure. Use new "O" rings coated with clean refrigerant oil. Add one ounce of new refrigerant oil to condenser prior to installation.
scientia non olet · About LEMON Manuals