Trouble Shooting

Verify customer complaint by observing indicators and gauges to determine correct operation with ignition switch in RUN position and engine off. Inspect for low brake fluid level, low washer fluid, low coolant level or low engine oil. Inspect for damaged engine oil filter, washer fluid reservoir, fuel tank, tripped inertia fuel switch, worn or damaged generator drive belt. Inspect for damaged wiring harness, loose or corroded connections or damaged switches and sensors. Inspect central junction box fuses No. 2 (5-amp), No. 6 (5-amp), No. 8 (5-amp, No. 15 (5-amp), No. 20 (5-amp) and No. 30 (30-amp). Inspect battery junction box fuse No. 103 (50-amp). If problem is found, repair or replace as necessary. If no problem is found, perform self-diagnostics. See SELF-DIAGNOSTIC SYSTEM .