Test D: Low Fuel Indicator Never Or Always On
NOTE:
After repair, clear DTCs and repeat self-test.
- Check fuel gauge for proper operation. If fuel gauge is operating correctly, go to next step. If fuel gauge is not operating correctly, perform TEST C: FUEL GAUGE INACCURATE .
- Disconnect all instrument cluster connectors. Inspect connectors for corrosion and pushed out pins. Connect all instrument cluster connectors, ensuring they are connected correctly. Operate system and verify if concern is still present. If concern is still present, replace instrument cluster. See INSTRUMENT CLUSTER under REMOVAL & INSTALLATION. If concern is not present, system is operating correctly at this time. Clear DTCs and repeat self-test.