LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Excursion 7.3 F, RWD >> Repair and Diagnosis (Single Page) >> Transmission >> Automatic Trans >> Automatic Transmission Removal & Installation >> Removal & Installation (Automatic Transaxle/Transmission) >> 4R44E, 5R44E & 5R55E >> Installation (Explorer, Mountaineer & Ranger)

Installation (Explorer, Mountaineer & Ranger)

  1. To install, reverse removal procedure. Use NEW "O" ring on filler tube. Ensure torque converter is fully seated. Align reference marks on drive shaft and axle flange or yoke.
  2. Tighten all bolts/nuts to specification. See TORQUE SPECIFICATIONS . Adjust linkage and fill transmission with appropriate fluid. See appropriate AUTOMATIC TRANSMISSION article.
scientia non olet · About LEMON Manuals