LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Excursion 7.3 F, RWD >> Repair and Diagnosis (Single Page) >> Suspension >> Rear Suspension - Cab & Chassis, Excursion & Super Duty >> Removal & Installation >> Shock Absorber >> Installation

Shock Absorber: Installation

To install, reverse the removal procedure. Manufacturer recommends using new fasteners on installation. Torque to specification. See TORQUE SPECIFICATIONS  .

Fig 1: Removing Shock Absorber Lower Retaining Nut & Bolt (Motorhome)
G00110748Courtesy of FORD MOTOR CO.
Fig 2: Removing Upper Shock Absorber Mounting (Motorhome)
G00110749Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals