Removal & Installation: Flywheel: Installation

1. To install, reverse removal procedure. On M/T models, install primary flywheel on secondary flywheel. Install and tighten secondary flywheel bolts to specification. See TORQUE SPECIFICATIONS . Apply Threadlock® sealant to threads on flywheel-to-crankshaft bolts before installing.
2. On all models, install and tighten flywheel-to-crankshaft bolts to specification. See TORQUE SPECIFICATIONS .

Fig 1: Identifying Dual Mass Flywheel Components (Excursion & F250-F550 Super Duty With M/T)

Courtesy of FORD MOTOR CO.