LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Excursion 7.3 F, RWD >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Mechanical >> Engine - 7.3L (99F E Series & 99F F450/550) V8 Turbo Diesel - VIN F >> Removal & Installation >> Camshaft >> Inspection

Removal & Installation: Camshaft: Inspection

  1. Inspect camshaft for wear. Ensure camshaft journal diameter is within specification. See CAMSHAFT  table under ENGINE SPECIFICATIONS.
  2. Inspect camshaft bearings for damage. Measure camshaft bearing inside diameter. Replace camshaft bearing if inside diameter is not within specification. See CAMSHAFT  table under ENGINE SPECIFICATIONS. If necessary to replace camshaft bearings, see CAMSHAFT BEARINGS .
  3. Using micrometer, measure thickness of camshaft thrust plate if removed from camshaft. Replace camshaft thrust plate if thickness is not within specification. See CAMSHAFT  table under ENGINE SPECIFICATIONS.
scientia non olet · About LEMON Manuals