LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Excursion 7.3 F, RWD >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Mechanical >> Engine - 7.3L (99F E Series & 99F F450/550) V8 Turbo Diesel - VIN F >> Overhaul >> Cylinder Block Assembly >> Rod Bearings

Rod Bearings

  1. Ensure connecting rod and connecting rod cap are marked with corresponding cylinder number before removing.
  2. Use Plastigage to check rod bearing clearance. Apply light coat of engine oil to connecting rod bolt threads before tightening nut to specification. See TORQUE SPECIFICATIONS .
  3. Ensure oil clearance and side play are within specification. See CRANKSHAFT, MAIN & CONNECTING ROD BEARINGS  and CONNECTING RODS  tables under ENGINE SPECIFICATIONS.
CAUTION: If main bearing failure exists, oil cooler must be replaced and turbocharger must be checked. For replacement of oil cooler, see OIL COOLER ASSEMBLY  under REMOVAL & INSTALLATION.
scientia non olet · About LEMON Manuals