LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Excursion 7.3 F, RWD >> Repair and Diagnosis (Single Page) >> Drivelines & Axles >> Driveshaft & Universal Joints >> Drive Shafts & Universal Joints - Trucks >> Adjustments >> Drive Shaft Angle >> Except Econoline, Excursion & F250-F550 Super Duty

Except Econoline, Excursion & F250-F550 Super Duty

  1. Measure ride height. See RIDE HEIGHT SPECIFICATIONS  table. Vehicle must be at curb weight (unloaded) condition. Check and note frame angle. See FRAME ANGLE . Place Anglemaster II Driveline Inclinometer (164-R2402) or protractor at any location along bottom of drive shaft. See Figure.
  2. Read and record angle. Subtract frame angle to obtain drive shaft angle. Compare noted angle with Drive Shaft (DS) angle specification. See appropriate illustration under DRIVELINE ANGLE SPECIFICATIONS . If drive shaft angle is not as specified, check pinion angle. See PINION ANGLE .
scientia non olet · About LEMON Manuals