LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Excursion 7.3 F, 4WD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 5 (CHARGING SYSTEM - GENERATORS & REGULATORS - EXCURSION & F250/F350 SUPER-DUTY (GASOLINE & Bi-Fuel)) >> Removal & Installation >> Generator >> Removal & Installation (Gasoline)

Removal & Installation (Gasoline)

WARNING: This page is about a different variant/trim than selected.

Disconnect negative battery cable. Remove drive belt from generator pulley. Disconnect generator harness retainer from generator bracket stud. Remove 3 generator bracket bolts. Remove 2 mounting bolts and generator from vehicle. Disconnect generator electrical connectors. To install, reverse removal procedure. Tighten fasteners to specification. See TORQUE SPECIFICATIONS .