LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Excursion 7.3 F, 4WD >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Mechanical >> Engine - 7.3L (99F E Series & 99F F450/550) V8 Turbo Diesel - VIN F >> Engine Oiling >> Oil Cooler Assembly >> Reassembly

Oil Cooler Assembly: Reassembly

  1. Apply engine oil to NEW "O" rings and "O" ring mating surfaces. Install large "O" rings and then small "O" rings on oil cooler.
  2. Install oil cooler front and rear headers on oil cooler. Ensure locating clips align in slots and headers are installed evenly on oil cooler. Perform oil cooler leakage test to ensure oil cooler is properly sealed.
scientia non olet · About LEMON Manuals