Vehicles with A/C
WARNING: This page is about a different car, the 2007 Ford Pickup, 2007 Ford F550 Super Duty, 2007 Ford F450 Super Duty, and 2007 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
- Position the A/C compressor and install the bolts.
- Tighten to 25 Nm (18 lb-ft).
- Remove the cap or plug and install a new O-ring seal. Install the A/C hose and retaining nut.
- Tighten to 8 Nm (71 lb-in).
- Connect the A/C high-pressure switch and the clutch electrical connectors.
- Install the A/C condenser assembly. For additional information, refer to CLIMATE CONTROL article.