LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Econoline E150, Van Passenger, 5.4 L >> Repair and Diagnosis >> Drivelines & Axles >> Driveshaft & Universal Joints >> Drive Shafts & Universal Joints - Trucks >> Overhaul >> Double CARDAN Universal Joints >> Installation (1-Piece Shaft Rear)

Installation (1-Piece Shaft Rear)

  1. Clean yoke. Inspect machined surface for scratches, nicks, or burrs. Check for arrows on slip joint and drive shaft to aid in alignment. Lubricate yoke splines and install into transmission output shaft.
  2. Connect drive shaft to rear companion flange. Tighten bolts to specification. See TORQUE SPECIFICATIONS .