Expedition & Navigator
Place Anglemaster II Driveline Inclinometer (164-R2402) on bottom of level portion of frame. Use area below driver seat. Measure angle. Repeat measurement on other side of vehicle. Average readings from both sides to obtain a more accurate reading. If measurement is not as specified, check chassis and suspension. See FRAME ANGLE SPECIFICATIONS table.
FRAME ANGLE SPECIFICATIONS
| Application | Angle Degrees |
|---|---|
| 2WD With Base Suspension | 1.34 |
| 2WD With Air Suspension | .61 |
| 4WD With Base Suspension | 1.05 |
| 4WD With Air Suspension | .31 |