Differential Specifications
DIFFERENTIAL ASSEMBLY SPECIFICATIONS
| Application |
Specification |
| ABS Sensor Air Gap |
.005-.045" (0.127-1.143 mm) |
| Axle Shaft End Play (Max.) |
.030" (.76 mm) |
| Differential Case Flange Runout |
.003" (.08 mm) |
| Maximum Backlash Variation Between Teeth |
.004" (.10 mm) |
| Nominal Pinion Shim Thickness |
.030" (.76 mm) |
| Pinion Gear Thrust Washer Thickness |
.030-.032" (.76-.81 mm) |
| Pinion Maximum Runout |
.010" (.25 mm) |
| Ring Gear Back Face Runout |
.004" (.10 mm) |
| Ring Gear Backlash |
.008-.015" (.020-.038 mm) |
| Side Gear Thrust Washer Thickness |
.030-.032" (.76-.81 mm) |
| INCH Lbs. (N.m) |
| Pinion Bearing Preload |
| New Bearings |
16-29 (1.8-3.2) |
| Original Bearings (With Oil Seal) |
8-14 (.9-1.6) |