LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SVT >> Repair and Diagnosis >> External Pages >> Different car >> Section 912 (Wheel Hubs & Bearings - Full Floating Axle - Ford -- F250-F350 Super Duty) >> Removal And Installation >> Axle Shaft >> Removal

Axle Shaft: Removal

WARNING: This page is about a different car, the 2005 Ford Pickup, 2005 Ford F550 Super Duty, 2005 Ford F450 Super Duty, and 2005 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
    NOTE: The wheels and tires do not have to be removed in order to remove the axle shafts.
    Fig 1: Removing Axle Shaft Retaining Bolts
    G03904696Courtesy of FORD MOTOR CO.
  1. Loosen and remove the retaining bolts.
  2. Remove the axle shaft.
    Fig 2: Removing Axle Shaft
    G03904697Courtesy of FORD MOTOR CO.
  3. Inspect the axle shaft O-ring seal for cracks, nicks or wear and install a new seal if required.
    Fig 3: Inspecting Axle Shaft O-Ring Seal For Cracks
    G03904698Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals