LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SVT >> Repair and Diagnosis >> External Pages >> Different car >> Section 81 (Engine Removal, Overhaul & Installation -- ECONOLINE, Excursion & F250-F550 Super Duty - Diesel 7.3L (99F E Series & 99F F450/550)) >> Fuel System >> High Pressure Oil Pump >> Installation

High Pressure Oil Pump: Installation

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2002 Ford RV Cutaway, 2002 Ford Pickup, 2002 Ford F550 Super Duty, 2002 Ford F450 Super Duty, and 2002 Ford Excursion. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install high pressure oil pump with gasket. Install mounting bolts and tighten to specification. See TORQUE SPECIFICATIONS . Install drive sprocket on high pressure oil pump shaft. Before tightening drive sprocket bolt, ensure sprocket is fully seated on pump shaft.
  2. To complete installation, reverse removal procedure. Ensure hoses are correctly routed. See Figure. Refill high pressure oil pump reservoir with clean engine oil. Tighten bolts to specification. See TORQUE SPECIFICATIONS .
scientia non olet · About LEMON Manuals