LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SVT >> Repair and Diagnosis >> External Pages >> Different car >> Section 81 (Engine Removal, Overhaul & Installation -- ECONOLINE, Excursion & F250-F550 Super Duty - Diesel 7.3L (99F E Series & 99F F450/550)) >> Fuel System >> Glow Plugs >> Removal & Installation

Removal & Installation

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2002 Ford RV Cutaway, 2002 Ford Pickup, 2002 Ford F550 Super Duty, 2002 Ford F450 Super Duty, and 2002 Ford Excursion. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect negative battery cable. Remove right or left valve cover as necessary. To remove right valve cover, remove drive belt, generator mounting bracket and generator. To remove left valve cover, remove intake ducting, crankcase breather and vacuum hose from vacuum pump.
  2. Disconnect harness connector from valve cover gasket. Remove valve cover bolts and valve cover. Disconnect wiring from fuel injectors. Remove valve cover gasket.
  3. Disconnect wiring from glow plug using a pair of pliers. Unscrew glow plug to remove. If damage is evident, replace glow plug. To install, reverse removal procedure. Tighten glow plug to 14 ft. lbs. (19 N.m). Ensure wiring under valve cover is routed to avoid moving parts.
scientia non olet · About LEMON Manuals