Removal & Installation
WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2002 Ford RV Cutaway, 2002 Ford Pickup, 2002 Ford F550 Super Duty, 2002 Ford F450 Super Duty, and 2002 Ford Excursion. However, it is still accessible from the selected car via links, so may be relevant.
Disconnect negative battery cable. Disconnect vacuum hose from Manifold Absolute Pressure (MAP) sensor and position aside. Disconnect electrical connectors from glow plug module, remove glow plug module retaining nuts and remove module. See Fig 1. To install, reverse removal procedure. Tighten glow plug module retaining nuts to specification. See TORQUE SPECIFICATIONS .