LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SVT >> Repair and Diagnosis >> External Pages >> Different car >> Section 1960 (Wheel Hubs & Bearings - Full Floating Axle - DANA -- F350-F550 Super Duty) >> Specifications >> Torque Specifications

Torque Specifications

WARNING: This page is about a different car, the 2007 Ford Pickup, 2007 Ford F550 Super Duty, 2007 Ford F450 Super Duty, and 2007 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS

Description Nm lb-ft
Rear hub nut
(To set bearings, back off the hub nut 90 degrees, retighten.)
95
24a
70
18
Axle shaft bolts 133 98
Rear hub bolts 104 77

a Maximum torque to rotate the hub is 2.3 N.m (20 lb-in) when the end play is zero.