Disassembly And Assembly Of Subassemblies: Countershaft: Assembly

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2007 Ford Pickup, 2007 Ford F550 Super Duty, 2007 Ford F450 Super Duty, 2007 Ford Cab & Chassis, and 2006 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Installing Front Countershaft Bearing

Courtesy of FORD MOTOR CO.

Remove the bearing from the Gear/Bearing Heater, then install the countershaft bearing.
- If necessary, use the Thrust Washer Bearing Race Driver to seat the bearing.

Fig 2: Installing Rear Countershaft Bearing

Courtesy of FORD MOTOR CO.

Remove the bearing from the Gear/Bearing Heater, then install the rear countershaft bearing.
- If necessary, use the Thrust Washer Bearing Race Driver to seat the bearing.