LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SVT >> Repair and Diagnosis >> External Pages >> Different car >> Section 1582 (Wheel Hubs & Bearings - Full Floating Axle - Ford -- F250-F350 Super Duty) >> Removal And Installation >> Axle Shaft >> Removal

Axle Shaft: Removal

WARNING: This page is about a different car, the 2006 Ford Pickup and 2006 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
    NOTE: The wheels and tires do not have to be removed in order to remove the axle shafts.
    Fig 1: Locating Axle Shaft Bolts
    G04644166Courtesy of FORD MOTOR CO.
  1. Loosen and remove the axle shaft bolts.
  2. Remove the axle shaft.
    Fig 2: Removing Axle Shaft
    G04644167Courtesy of FORD MOTOR CO.
  3. Inspect the axle shaft O-ring seal for cracks, nicks or wear and install a new seal if required.
    Fig 3: Locating Axle Shaft O-Ring Seal
    G04644168Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals