LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SVT >> Repair and Diagnosis >> External Pages >> Different car >> Section 1550 (Front Suspension - Four Wheel Drive (4WD) -- F250-F550 Super Duty) >> Removal And Installation >> Wheel Knuckle & Axle Shaft >> Notes

Wheel Knuckle & Axle Shaft: Notes

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Ford Pickup, 2006 Ford F550 Super Duty, 2006 Ford F450 Super Duty, 2006 Ford Cab & Chassis, and 2005 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
SPECIAL TOOL(S)

G04643174
Steering Arm Remover
211-003 (T64P-3590-F)
G04643175
C-Frame and Screw
211-023 (T74P-3044-A1)
G04643176
Installer/Remover, Drive Pinion Oil Seal
205-440
G04643177
Installer, Wheel Knuckle Seal (F250/350)
205-830
G04643178
Installer, Wheel Knuckle Seal (F450/550)
205-831
MATERIAL

Item Specification
Threadlock and Sealer TA-25 WSK-M2G351-A5
Fig 1: Wheel Knuckle & Axle Shaft Replacement Components With Torque Specifications
G04643179Courtesy of FORD MOTOR CO.