LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> Suspension >> Rear Suspension >> Removal & Installation >> Wheel Bearing & Hub Assembly >> Removal & Installation (Disc Brakes)

Removal & Installation (Disc Brakes)

CAUTION: DO NOT use impact wrench to remove or install axle hub retainer. Damage to spindle or hub assembly will result.

Raise and support vehicle. Remove wheel assembly. Remove brake caliper and rotor. Wire caliper aside. Remove axle hub retaining nut. Remove wheel hub. To install, reverse removal procedure. Tighten bolts to specification. See TORQUE SPECIFICATIONS .

scientia non olet · About LEMON Manuals