LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> Restraints >> Air Bag, SRS >> Air Bag Restraint Systems >> Disabling & Activating Air Bag System >> Activating System >> For Diagnostics

For Diagnostics

  1. Disconnect negative battery cable. Wait at least one minute for back-up power supply to deplete stored energy. Remove air bag simulator from clockspring connector. Remove air bag simulator from passenger-side air bag vehicle harness connector. Install driver-side air bag module. See DRIVER-SIDE AIR BAG MODULE  under REMOVAL & INSTALLATION.
  2. Install passenger-side air bag module. See PASSENGER-SIDE AIR BAG MODULE  under REMOVAL & INSTALLATION. Reconnect negative battery cable. Prove out system. See PROVE OUT SYSTEM  under DIAGNOSTICS.Reprogram pre-set radio frequencies and set clock.
scientia non olet · About LEMON Manuals