LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> Restraints >> Air Bag, SRS >> Air Bag Restraint Systems >> Diagnostics >> Verify System

Verify System

To verify system, use prove out system procedure with Air Bag Simulator (418-F088/105-R0012) in place of the air bag modules. See PROVE OUT SYSTEM  .

DIAGNOSTIC SYMPTOMS

Condition Go To Test
Primary AIR BAG warning light on continuously TEST A TEST P 
Secondary AIR BAG warning light flashing/DTCs retrieved TEST P TEST Q 
No communication with RCM TEST A 
No warning light prove out TEST P TEST Q 
DIAGNOSTIC TROUBLE CODE (DTC) IDENTIFICATION

Fault Code/Flash Code Go To Test
B1231/19 TEST C 
B1318(1) (2)
B1342/24 TEST B 
B1869(1) TEST P 
B1870(3) TEST Q 
B1887/15 TEST F 
B1888/16 TEST H 
B1891/.. TEST O 
B1892/.. TEST N 
B1916/15 TEST G 
B1921/21 TEST D 
B1925/16 TEST I 
B1932/32 TEST J 
B1933/33 TEST K 
B1934/34 TEST L 
B1935/35 TEST M 
C1414/29 TEST E 
(1) Continuous illumination or no prove out.
(2) Check RCM power and ground circuits for high resistance before checking charging system for low voltage.
(3) No prove out.
Fig 1: Identifying Restraints Control Module (RCM) Connector
G99I00156Courtesy of FORD MOTOR CO.