LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> Restraints >> Air Bag, SRS >> Air Bag Restraint Systems >> Diagnostics >> Clearing Fault Codes

Clearing Fault Codes

  1. Connect New Generation Star (NGS) tester to Data Link Connector (DLC), located under instrument panel. Turn ignition switch to RUN position. Select MODEL YEAR and VEHICLE. Select DIAGNOSTIC DATA LINK. Select RCM. Select DIAGNOSTIC TEST MODES. Select RETRIEVE/CLEAR CONTINUOUS DTCs. Press C-ALL.
  2. Clearing of individual DTCs (C-ONE) is not supported by RCM. The NGS will retrieve DTCs again after clearing DTCs, and if any remain they will be displayed. Hard DTCs will be redisplayed after clearing DTCs since they cannot be cleared from air bag RCM.
scientia non olet · About LEMON Manuals