Torque Specifications
WARNING: This page is about a different variant/trim than selected.
TORQUE SPECIFICATIONS
| Application | Ft. Lbs. (N.m) | ||
|---|---|---|---|
| Camshaft Sprocket Bolt | |||
| Intake | 50 (68) | ||
| Exhaust | |||
| Step 1 | 44 (60) | ||
| Step 2 | 89 (120) | ||
| Center Bolt-Left & Right-Hand Support Insulator Bolts | 89 (120) | ||
| Crankshaft Pulley Bolt | 85 (115) | ||
| Engine Front Support Insulator Bolt/Nut | 61 (83) | ||
| Engine Lifting Eye With Coolant Hose Brackets | 13 (18) | ||
| Exhaust Camshaft Center Blanking Plug | 27 (37) | ||
| Idler Pulley | |||
| Lower Pulley | 28 (38) | ||
| Upper Pulley | |||
| With Lower Pulley | 28 (38) | ||
| Without Lower Pulley | 17 (23) | ||
| Serpentine Drive Belt Idler Pulley Bolt | 30 (40) | ||
| Spark Plugs | 11 (15) | ||
| Timing Belt Tensioner Attaching Bolt | 18 (25) | ||
| Water Pump Bolt | 13 (18) | ||
| Water Pump Pulley Bolt | 18 (24) | ||
| Wheel Lug Nut | 94 (128) | ||
| INCH Lbs. (N.m) | |||
| Lower Engine Front Cover Bolt | 71 (8) | ||
| Timing Belt Tensioner Spring Retaining Pin | 89 (10) | ||
| Upper Engine Front Cover Bolt | 89 (10) | ||
| Valve Cover | |||
| Step 1 | 18 (2) | ||
| Step 2 | 62 (7) | ||
| Valve Cover Appearance Cover | 62 (7) | ||