LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Engine - 2.0L Inline - VIN B & 3) >> Removal & Installation >> Water Pump >> Installation (Cougar)

Installation (Cougar)

WARNING: This page is about a different variant/trim than selected.

Install NEW "O" ring gasket on water pump. See Figure. Install water pump and tighten bolts to specification. See TORQUE SPECIFICATIONS . To complete installation, reverse removal procedure. Tighten bolts to specification. Fill cooling system. Start engine and check for leaks.

scientia non olet · About LEMON Manuals