LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Engine - 2.0L Inline - VIN B & 3) >> Removal & Installation >> Thermostat >> Installation (Focus)

Installation (Focus)

WARNING: This page is about a different variant/trim than selected.
    NOTE: Install a new rubber seal.
    Fig 1: Installing Thermostat Cover Bolts
    G01611786Courtesy of FORD MOTOR CO.
  1. To install, reverse the removal procedure.
  2. Fill the cooling system.
scientia non olet · About LEMON Manuals