LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Engine - 2.0L Inline - VIN B & 3) >> Removal & Installation >> Intake Manifold >> Installation (Contour, Cougar & Mystique)

Installation (Contour, Cougar & Mystique)

WARNING: This page is about a different variant/trim than selected.

Clean gasket mating surface. Position NEW gasket on intake manifold. Install and tighten bolts/nuts in a crisscross pattern to specification. See TORQUE SPECIFICATIONS . To complete installation, reverse removal procedure.

scientia non olet · About LEMON Manuals