LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Engine - 2.0L Inline - VIN B & 3) >> Removal & Installation >> Crankshaft Rear Oil Seal >> Removal

Crankshaft Rear Oil Seal: Removal

WARNING: This page is about a different variant/trim than selected.

Remove transaxle. For A/T, see appropriate TRANSMISSION REMOVAL & INSTALLATION article in TRANSMISSION SERVICING. For M/T, see appropriate article in CLUTCHES. Remove flexplate (A/T) or flywheel (M/T). Using Seal Remover (T92C-6700-CH), remove oil seal from rear seal housing. If seal is difficult to remove, remove seal housing and seal.

scientia non olet · About LEMON Manuals