LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Engine - 2.0L Inline - VIN B & 3) >> Removal & Installation >> Crankshaft Front Oil Seal >> Installation

Crankshaft Front Oil Seal: Installation

WARNING: This page is about a different variant/trim than selected.

Apply engine oil to new oil seal. Using Seal Installer (T81P-6700-A or T81P-6710-A), install oil seal. Ensure seal is fully seated. To complete installation, reverse removal procedure.

scientia non olet · About LEMON Manuals