LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Engine - 2.0L Inline - VIN B & 3) >> Overhaul >> Valve Train >> Hydraulic Valve Tappet

Hydraulic Valve Tappet

WARNING: This page is about a different variant/trim than selected.

Check contact and sliding surfaces of valve tappet for pitting, scoring or excessive wear. Replace valve tappet if plunger is not free in body. Plunger should fall with own weight when assembled dry.

scientia non olet · About LEMON Manuals