LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Engine - 2.0L Inline - VIN B & 3) >> Overhaul >> Cylinder Head >> Valves

Cylinder Head: Valves

WARNING: This page is about a different variant/trim than selected.

Measure valve stem diameter at top, middle and bottom of valve stem. If valve stem is not within specification, replace valve. Measure valve head margin. Replace valve if not within specification. See VALVES & VALVE SPRINGS  table under ENGINE SPECIFICATIONS.