LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Engine - 2.0L Inline - VIN B & 3) >> Overhaul >> Cylinder Block Assembly >> Thrust Bearing

Thrust Bearing

WARNING: This page is about a different variant/trim than selected.

Check crankshaft end play. Replace thrust bearing if crankshaft end play is not within specification. See CRANKSHAFT, MAIN & CONNECTING ROD BEARINGS  table under ENGINE SPECIFICATIONS. Thrust bearing is center bearing in block. Install thrust bearings with oil groove facing crankshaft cheek.

scientia non olet · About LEMON Manuals