LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Engine - 2.0L Inline - VIN B & 3) >> Overhaul >> Cylinder Block Assembly >> Rod Bearings

Rod Bearings

WARNING: This page is about a different variant/trim than selected.
  1. Ensure connecting rod and cap have matching identification marks. Ensure bearing oil clearance and connecting rod side play are within specification. See CRANKSHAFT, MAIN & CONNECTING ROD BEARINGS  and CONNECTING RODS  tables under ENGINE SPECIFICATIONS.
  2. If any bearing clearance cannot be adjusted to standard specification, grind crankshaft and use undersize bearings. Tighten connecting rod bearing cap nuts to specification. See TORQUE SPECIFICATIONS .
scientia non olet · About LEMON Manuals