LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Engine - 2.0L Inline - VIN B & 3) >> Overhaul >> Cylinder Block Assembly >> Piston & Rod Assembly

Piston & Rod Assembly

WARNING: This page is about a different variant/trim than selected.

Ensure rod, piston and cap are marked with matching numbers before removing. If removing piston from rod, note rod-to-piston position. Install piston with arrow mark on piston toward front of engine.

scientia non olet · About LEMON Manuals