LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Engine - 2.0L Inline - VIN B & 3) >> Overhaul >> Cylinder Block Assembly >> Notes

Cylinder Block Assembly: Notes

WARNING: This page is about a different variant/trim than selected.
NOTE: Inspect cylinder block for oil seepage or leaks. Porosity or sand hole(s) causing oil seepage can occur in casting process. If leak is attributed to porous condition of cylinder block or sand hole(s), service block using Metallic Plastic (C6AZ-19554-A). DO NOT service cracks with metallic plastic. Follow manufacturer's instructions for servicing cylinder block.
scientia non olet · About LEMON Manuals