Camshaft Specifications
WARNING: This page is about a different variant/trim than selected.
CAMSHAFT
| Application | In. (mm) | ||||
|---|---|---|---|---|---|
| End Play | .0008-.008 (.02-.20) | ||||
| Journal Diameter | 1.0220-1.0228 (25.96-25.98) | ||||
| Journal Out-Of-Round | .003 (.08) | ||||
| Camshaft Runout | .005 (.127) | ||||
| Lobe Height | |||||
| Intake | |||||
| Standard | .245 (6.23) | ||||
| Service Limit | (1) | ||||
| Exhaust | |||||
| Standard | .245 (6.23) | ||||
| Service Limit | (1) | ||||
| Oil Clearance | |||||
| Standard | .0013-.0032 (.0335-.0835) | ||||
| Service Limit | (1) | ||||
|
|||||