LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Automatic Transmission - Diagnosis - Cd4E) >> Diagnosis & Testing >> Transmission Solenoid Cycling & Drive Test (Dynamic Test) >> Electronic Pressure Control Solenoid

Electronic Pressure Control Solenoid

WARNING: This page is about a different variant/trim than selected.

Record line pressure. Maximum line pressure should be 76 psi (5.3 kg/cm2 ). If line pressure is not within specification, see HYDRAULIC PRESSURE TESTS under PERFORMANCE TESTS in FORD CD4E (MAZDA LA4A-EL) OVERHAUL article. Depress Electronic Pressure Control (EPC) switch. Minimum line pressure should be 64 psi (4.5 kg/cm2 ). If line pressure is not within specification, see HYDRAULIC PRESSURE TESTS under PERFORMANCE TESTS in FORD CD4E (MAZDA LA4A-EL) OVERHAUL article.

scientia non olet · About LEMON Manuals