LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 997 (Power Steering System -- F150 Pickup) >> Removal And Installation >> Power Steering Pump Pulley >> Removal

Power Steering Pump Pulley: Removal

WARNING: This page is about a different car, the 2005 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.

    Vehicles with 5.4L engine 

  1. Remove the air cleaner intake pipe. For additional information, refer to INTAKE AIR DISTRIBUTION & FILTERING .

    2. Vehicles with 4.6L engine 

  2. Remove the cooling fan and shroud. For additional information, refer to ENGINE COOLING .

    3. Vehicles with 4.2L engine 

  3. Remove the air cleaner outlet pipe. For additional information, refer to INTAKE AIR DISTRIBUTION & FILTERING .

    4. All vehicles 

  4. Rotate the accessory drive belt tensioner clockwise and remove the accessory drive belt from the power steering pump pulley.
  5. Using the special tool, remove the power steering pump pulley.
    Fig 1: Removing Power Steering Pump Pulley Using Special Tool
    G03945466Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals