Removal and Installation
WARNING: This page is about a different car, the 2005 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the rear door trim panel. For additional information, REFER to INTERIOR TRIM AND ORNAMENTATION .
- Remove the rear door mounted speaker. For additional information, REFER to SPEAKERS .
- Remove the rear door interior moulding.
- Remove the rear door watershield.
- Remove the rear door window glass-to-regulator assembly bolts.
- To install, tighten to 11 Nm (8 lb-ft).
- Remove the rear door window glass.
- Pull the rear door window glass out through the top inboard side of the door.
- To install, reverse the removal procedure.
NOTE:
Some vehicles may use rivets instead of rear door window glass-to-regulator assembly bolts.