LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 994 (Windows And Glass -- F150 Pickup) >> Removal And Installation >> Front Door Window Glass >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2005 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the front door trim panel. For additional information, REFER to INTERIOR TRIM AND ORNAMENTATION .
  2. Remove the front door interior moulding.
  3. Remove the front door watershield.
  4. Remove the front door window glass-to-regulator assembly bolts.
    • To install, tighten to 9 Nm (80 lb-in).
  5. Lower the front door window regulator to the full downward position.
  6. Pull the front door window glass out through the top outboard side of the door.
    Fig 1: Pulling Front Door Window Glass Out Through Top Outboard Side Of Door
    G03916867Courtesy of FORD MOTOR CO.
  7. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals