LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 989 (Engine System-General Information -- F150 Pickup) >> General Procedures >> Valve Stem Diameter

Valve Stem Diameter

WARNING: This page is about a different car, the 2005 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
  1. Measure the diameter of each intake and exhaust valve stem at the points shown. Verify the diameter is within specification.
    • If out of specification, install new components as necessary.
    Fig 1: Measuring Diameter Of Valve Stem
    G03905280Courtesy of FORD MOTOR CO.