LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 989 (Engine System-General Information -- F150 Pickup) >> General Procedures >> Valve Seat Width

Valve Seat Width

WARNING: This page is about a different car, the 2005 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
  1. Measure the valve seat width. If necessary, grind the valve seat to specification.
    • Measure the intake valve seat width.
    • Measure the exhaust valve seat width.
    • Recheck the valve spring installed length after the seats have been ground, and shim the valve springs as necessary to achieve the correct installed spring length.
    Fig 1: Measuring Valve Seat Width
    G03919825Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals