LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 986 (Engine - 4.2L -- F150 Pickup) >> In-Vehicle Repair >> Rocker Arm >> Removal

Rocker Arm: Removal

WARNING: This page is about a different car, the 2005 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: During engine repair procedures, cleanliness is extremely important. Any foreign material, including any material created while cleaning gasket surfaces, that enters the oil passages, coolant passages or the oil pan can cause engine failure.
  1. Remove the valve cover. For additional information, refer to VALVE COVER - LH  or VALVE COVER - RH .
    2. CAUTION: If the rocker arms are to be reused, they must be installed in their original locations. Mark the rocker arms for location.
  2. Remove the bolts, the rocker arm pivots and the rocker arms.
  3. Inspect the rocker arms. For additional information, refer to ENGINE SYSTEM-GENERAL INFORMATION .
scientia non olet · About LEMON Manuals