LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 986 (Engine - 4.2L -- F150 Pickup) >> In-Vehicle Repair >> Flexplate >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2005 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the transmission. For additional information, refer to AUTOMATIC TRANSMISSION - 4R70E/4R75E .
  2. Remove the bolts and the flexplate.
    • To install, tighten to 80 Nm (59 lb-ft) in a criss-cross pattern.
  3. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals