LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 986 (Engine - 4.2L -- F150 Pickup) >> In-Vehicle Repair >> Crankshaft Rear Seal >> Removal

Crankshaft Rear Seal: Removal

WARNING: This page is about a different car, the 2005 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the flywheel or the flexplate. For additional information, refer to FLYWHEEL  or FLEXPLATE .
  2. Using the special tools, remove the crankshaft rear seal.
    Fig 1: Using Special Tools To Remove Crankshaft Rear Seal
    G03962078Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals