LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2000 >> Contour SE, 2.5 L, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 986 (Engine - 4.2L -- F150 Pickup) >> In-Vehicle Repair >> Crankshaft Front Seal >> Removal

Crankshaft Front Seal: Removal

WARNING: This page is about a different car, the 2005 Ford Pickup. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Crankshaft Front Seal
    G03962010Courtesy of FORD MOTOR CO.
  1. Remove the crankshaft pulley. For additional information, refer to CRANKSHAFT PULLEY .
  2. Using the special tool, remove the crankshaft front seal. Discard the crankshaft front seal.
    Fig 2: Removing Crankshaft Front Seal
    G03962011Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals